Mtr-3
With Printer
Read more
Manual
and Faq (Zipped world file)
EPR-3 Printer for MTR-3l
Options
8390 EPR-3 Thermal printer
8391 Extra
battery package for EPR-3
8392 Y-cable Pc/Martel printer
|
- Mini Time recorder (MTR-3)
- The Mini Time Recorder
(MTR-3) is a reading/storage unit used solely together with
our Electronic Punching and Timing system (EPT) when “electronic
timing” is used. The MTR-3 is water resistant, has a internal
battery and an internal memory of about 1000 e-cards. The internal
battery last for 10 years and can be factory replaced. MTR-3
can be connected to Pc, EPR-3 thermal printer and optional also
to the old MTR-2 printer.
- Facts:
- Reads e-cards,
store all information and makes a Printout on attached printer
or/and send data to a PC.
- Light signal for
confirmation of data received from an e-card
- Water resistant
- Internal battery
- Stores information
for 1000 e-cards depending on number of controls.
- Up to 8 races
can be stored in the internal memory.
- Can print on both EPR-3
printer or the Martell MTR-2 printer with a optional Y-cable.
|
