EMIT TIME RECORDER RTR 2

The Time Recorder RTR 2 is one of the most advanced timimg equipment at the market, but still it is easy to use. Its price is also very competitive. Due to its user-friendliness and its capacity, the RTR 2 is suited for small as well as for large competitions.

Emit Time Recorder RTR 2 is a timing device meant to be used in a variety of sports. The most common use is time-taking combined with the registration of start-numbers. It is possible to connect the RTR 2 with various extra equipment used to handle competitions where times, start-numbers, points etc., are to be registered.

Description

The Time Recorder RTR 2 has a key board used to register start-numbers. There are two displays that present information. The first one displays start-numbers with large characters. The other display , four lines, gives information in both the programming and the user mode. The built-in printer prints all registrations. The RTR 2 has got two gates (connections) for external equipment. Among these is one connection for a PC and another for a barcode reader.

Equipment that comes with the RTR 2:

Finishline-button with 3 meter cable.

Battery recharger (to charge the built-in batteries).

Several language modules available

Built-in programs

The Time Recorder RTR 2 has 13 programs located in its PROM. The user decides which program that is to be used, and then he answers the questions associated with this particular sport (programming). Thereafter the RTR 2 is put into user mode.

Choices of programs:

1. Output of the finish-line times
2. Output of the start numbers and the finish-line times.
3. Interval start. Output of the start-numbers, the used times, and the finish-line times.
4. Alpin program no. 2, advanced alpin that makes use of some extra equipment (RAC assembly box and RKP key pads). Both the start-numbers and the times are recorded at all places where the used times are to be taken.
5. Alpin program no. 1, simple alpin where the startgate and the photocell(s) are coupled directly to the RTR 2.
6. Cross country, special program with a startgate, intermediate times, and photocells at the finish line.
7. Biathlon, special program with the same possibilities as in program 6. In addition, misses can be registered at the place where the shooting takes place, with RKP keypads.
8. Parallel slalom
9. Time-taking in mass running competitions. The time is taken at the same time as the start-number is registered (usually with a bar code reader).
10. Track & Field, time-taking in heats, one lane.
11. Track & Field, time-taking in heats, multiply lanes.
12. Orienteering, EPT manually timing
13. Orienteering, EPT Electronic timing

Extra equipment

The most common equipment extra equipment is:
 

A special case for storage and transportation.	Photocell (alpin, cross-country, etc.)
A synchronizing box with 25 m. cable (orienteering, road races, etc.)	Barcode reader (reads start numbers written in barcodes).
Datacable between RTR 2 and a PC.	RAC assembly box with 10 inputs.
Start gate (alpin, cross-country, etc.) EPT reading unit	RKP keypads (alpin, biathlon, etc.)

Specifications
 

	Battery driven, built-in rechargeable batteries that can be uses for at least 10 hours.
	Remembers (stores) 5.000 pairs of start numbers/times. Contents of 200 e-cards
	125 different classes may be programmed (competitions with interval start).
	Capacity for people in funnel: 255 (255 times can be taken before any start numbers are registered.
	Display for presenting start numbers.
	Display, 4 lines, for message in the programming mode and the user mode.
	Built-in printer with output of all "events".
	RS 232 series output to a PC.
	RS 232 series output to a PC.
	5 extra inputs for various extra equipment.
	Size: 22x28cm.
	Weight: 1.8 kg.
	Developed and produced in Norway by Emit AS.